




Dampen your brow spoolie with the Rose Water Spray. We recommend the 123 Micro Stroke Brush or 122 Define and Line Brush. Gently rub the bristles of your spoolie against the Heist Brow Soap to create a gel-like residue.
Aqua, Rosa Damascena Flower Water, Citrus Grandis Seed Extract, Glycerin, Sodium Benzoate, Potassium Sorbate.


For Professional Use Only.
Brow Tinting:
Always consult and test patch.
Step 1 - Preparation:
- Remove all eye make up prior to tinting using Brow Code's Micellar Eye Make Up Remover
- For optimum results, eyebrows should be dry and free of all oils and sebum as this can create a barrier between causing the tint to not ahere correctly.
Step 2 - Mix and Apply:
- Immediately prior to tinting mix equal parts of Brow Code's Eyelash & Eyebrow Tint and Brow Code's Cream Peroxide Oxidant 3% Developer into a creamy paste using the included application stick. *The mixing ratio is 1:1 / equal part (Generally 4 drops of Cream ot Liquid Oxidant is enough to make an even paste)
Step 3 - Application:
- Prior to application, ask your client to close their eyes until the treatment has been completed.
- Using the application stick, apply the paste onto the eyebrows ensuring you place the tint into the shape you are wanting to achieve as it can slightly stain the skin.
- Leave the tint on for 5-12 minutes (application times will vary between clients). *The longer the application time the more intensive the result.
Step 4 - Removal:
- Begin by removing excess tint using a dry cotton ball. Then using Brow Code's Micellar Eye Make Up Remover gently remove excess tint in areas you wish to lighten.
- Clean up the eyebrows at the end of the treatment using Brow Code's Tint Remover - this will remove any stains on the skin you wish to remove. *DO NOT use the Tint Remover directly on eyelashes or on the skin around the eyes as this can cause serious irritation.
Brow Code Lustre Lamination Steps
Note: Read all Instructions & Important Information below before starting treatment.
- Apply Brow Code Lustre Step 1 - brow perming solution to one brow at a time. Take care to keep solution to hair area only. Cover brows with cling wrap to ensure the hairs are fixed in an upright position. See the timing & hair type guide below to learn how long to leave Step 1 on the brows.
TIMING:
Step 1: 5-8 minutes. No longer than 9 minutes.
Step 2: 5-8 minutes.
Step 3: Client to remove after 2 hours and apply Brow Gold.
HAIR TYPE GUIDE:
Thin or Fine Brow Hairs: 4 - 5 Minutes
Medium or Normal Brow Hairs: 5 - 7 Minutes
Coarse of Stubborn Hairs: 7 - 10 Minutes - After leaving Step 1 on for your desired time, remove the cling wrap and then by using a dry cotton tip, remove all the solution in an upwards motion leaving no residue. Once clean, add Step 2 - Brow Fixing Solution to both brows together. Cover again using your cling wrap again to fix the hairs into place.
- After leaving Step 2 on for your desired time, remove cling wrap then remove all the solution in an upwards motion using a cotton tip, leaving no residue. Once clean, apply Brow Code Tint (or colour deposit) using the Brow Code 122 Brush for application of colour.
- After waiting for the desired amount of time, remove all the solution then apply Step 3 - Brow Keratin Nourish to both brows. Use a generous amount to ensure this is applied to the hair and skin. Leave Step 3 - Brow Keratin Nourish on the brows for the client to leave with.
- Retail the Brow Code Brow Gold Oil to your client and instruct them to nourish the hair and skin daily.
Aftercare
What should and should not be done 24 hours post-treatment for longevity of results:
- Keep brows dry for 24 hours.
- Use Brow Code Gold Brow Growth Oil daily.
- Do not apply make-up or undertake further eye treatments for at least 24 hours after your treatment.
- Avoid swimming/sauna/working out for 24-48 hours. Any excess moisture after this time can cause a slight curl/frizz to the brow hair.
- Do not allow prolonged exposure to direct sunlight or heat.
- Do not apply Retin-A, AHA or exfoliate around the brow area for 72 hours either side of the treatment.
- No self-tanning products should be used on the face for one week prior and 48 hours after treatment.
Important Information
- Tint and other colour deposit techniques develop much faster after lamination due to porous hair. We therefore advise to reduce your timings and watch the development of the colour closely.
- Brow Lamination must always be performed before waxing, threading or plucking treatments. IF performing this service after to tidy brows - You must completely avoid getting ANY solution on the area to be waxed.
- Do not apply scrubs to the eyebrow area before lamination.
- Never use the same brush to apply Step 1 and Step 2. You must use two disposable brushes for both steps.
- In case of contact with eyes, wash immediately with distilled water.





NOTE: Take Extreme caution not to overheat. Never leave the heating wax unattended. Never heat for more than 80 seconds. Follow the enclosed instructions exactly to avoid any risk of burning,
Heat the wax in the microwave until it forms a smooth, creamy consistency.
As a guide, heat a full tub on MAX 80 seconds or half a tub for MAX 60 seconds (time will vary depending on your Microwave wattage).
Once heated, leave to stand in the microwave for 2 minutes.




STEP 1 - Use Brow Code Micellar Remover to ensure your client’s skin is completely clean and ready for the lamination treatment. Simply dampen a cotton pad with the Micellar Remover to remove any make-up products from the brows and the surrounding area.
FOR OPTIMUM RESULTS, APPLY YOUR BROW CODE BROW TINT IN BETWEEN LAMINATION SOLUTION STEPS 2 & 3
STEP 2 - Apply Brow Adhesive evenly through your client’s brow in a thin layer. Use a disposable spoolie brush to comb & fix the hairs in place in an upward direction. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in.
STEP 3 - On top of the adhesive layer, apply ½ a sachet of Step 1 (Brow Perming Solution) to one of your client’s brow in an upwards motion. One sachet services both eyebrows. Apply the solution to the hair area only.
STEP 4 - Cover brow with the Brow Wrap & make sure the hairs are fixed in an upright position. Perform Step #2 and Step #3 to the other brow. Leave to process for 5 to 9 minutes depending on your client’s hair type (no longer than 9 minutes):
- Very Thin or Fine Brow Hairs: 5-7 minutes
- Medium or Normal Brow Hairs: 7-8 minutes
- Coarse or Stubborn Hairs: 8-9 minutes
STEP 5 - Remove the Brow Wrap from your client’s first brow. Use a dry cotton tip to remove the Brow Perming Solution from your client’s eyebrow in an upwards motion.
STEP 6 - Apply ½ a sachet of Step 2 (Brow Fixing Solution) to one brow using a new cotton tip. One sachet services both eyebrows. Cover your client’s brows with Brow Wrap & make sure the hairs are fixed in an upright position. Leave to process for 5 to 9 minutes depending on your client’s hair type (no longer than 9 minutes). Perform step #5 and Step #6 to the other brow
STEP 7 - Remove the Brow Wrap from your client’s first brow. Use a dry cotton tip to remove the Brow Fixing Solution from your client’s eyebrow in an upwards motion. Perform Step #7 to the other brow. If desired, apply Brow Code Tint using the Brow Code 122 Brush to add colour to the brows. Please be mindful that lamination increases the depth of colour. Take care with the timing process for tint by watching the development of the colour closely. Make sure the tint removal process is done using a dry cotton tip. You can now wax your client’s brows if needed.
STEP 8 - Apply one sachet of Step 3 (Brow Keratin Nourish Cream) to each brow. One sachet services both eyebrows in an upwards motion. Using a spoolie, brush the cream evenly through your client’s brows. Remove after 2 hours with a dry cotton tip or pad.






- Apply one sachet of Brow Adhesive evenly through your brows in a thin layer. One sachet services both eyebrows. Use a lamination comb to fix the hairs in place in an upward direction. Please note that the Brow Adhesive dries quickly, so make sure you are brushing the product through your brows straight after applying it to your brows. Ensure you are setting the brow in the exact direction you wish to laminate the hairs in.
- On top of the adhesive layer, apply one sachet of Step 1 (Brow Perming Solution) to one brow at a time. One sachet services both eyebrows. Apply the solution to the hair area only.
- Cover brows with Brow Wrap (sold separately) & make sure the hairs are fixed in an upright position. Leave to process for 5 to 8 minutes depending on your hair type (no longer than 9 minutes):
- Very Thin or Fine Brow Hairs: 5-7 minutes
- Medium or Normal Brow Hairs: 7-8 minutes
- Coarse or Stubborn Hairs: 8-9 minutes
- Remove Brow Wrap. Use a dry cotton tip to remove the Brow Perming Solution from your eyebrows.
- Apply one sachet of Step 2 (Brow Fixing Solution) to each brow using a new cotton tip. One sachet services both eyebrows. Cover your brows with Brow Wrap & make sure the hairs are fixed in an upright position. Leave to process for 5 to 8 minutes depending on your hair type (no longer than 9 minutes). The same time-frame applies as outlined in step 3.
- Remove Brow Wrap. Use a dry cotton tip to remove the Brow Fixing Solution from your eyebrows. If desired, apply Brow Code Tint using the Brow Code 122 Brush to add colour to the brows. Please be mindful that lamination increases the depth of colour. Take care with the timing process for tint by watching the development of the colour closely. Make sure the tint removal process is done using a dry cotton tip.
- Apply one sachet of Step 3 (Brow Keratin Nourish Cream) to each brow. One sachet services both eyebrows. Using a laminagion comb, brush the cream evenly through the brows. Remove after 2 hours with a dry cotton tip or pad.
- Use Brow Gold Nourishing Growth Oil to nourish your skin & hair daily, ensuring the hair does not dry or curl. For maintenance, each morning your laminated brows will require styling by brushing & setting in place.









Prior to Henna Treatment:
- There must be no sunless tan/self-tanners used on the skin prior to Brow Henna application. This will turn the henna a green or yellow shade.
- Do not apply Retin-A, AHA around the brow area for 72 hours before the treatment.
- A patch test must be performed 24-48 hours prior to use.
Henna Application:
- Step #1 - Mix one capsule of Brow Code Henna colour with 10-12 drops of the Rose Water in your mixing dish. Break up any spherical circles that may be present with the brush. Set the mixture aside for 5-10 mins to allow the henna powder to form a smooth paste.
- Step #2 - Cleanse the brows using the Brow Conditioning Cleanser. For oily skin types or when removing heavy makeup, work your fingertips in a circular motion to deeply cleanse the brow hairs and surrounding skin. Remove with a dry cotton round.
- Step #3 - Gently exfoliate the brow area using the Brow Scrub. The fruit enzyme exfoliant is essential to remove any build-up of dead skin cells & allows the henna to create a more even and longer-lasting stain. Remove all traces from skin and brows using a damp cotton round.
- Step #4 - Once dry, carefully apply the first layer of henna to one brow at a time to create your desired shape. Apply the second layer to each brow and keep the area moist by applying small amounts of henna paste or Rose Water to the brow, which allows the Henna to continue to develop during this time. For a deeper stain, apply a third layer. Allow the Henna to develop on the brows for a total time of 15-25 minutes.
- Step #5 - Remove the moist henna with a damp cotton round. Wipe the Henna from each brow in a gentle motion from the head to the tail of the brow. Be careful not to scrub back and forth as this can remove the Henna stain.
- Step #6 - Treat the brows by gently massaging Brow Gold Oil into the brow hairs and the skin. The Brow Gold helps to lock in the colour for a longer-lasting stain whilst adding extra nourishment and shine to each hair, creating fuller, healthier brows.
Henna Aftercare
- Do not apply Retin-A, AHA around the brow area for 72 hours after the treatment.
- Do not undertake this treatment alongside Lamination for 48 hours.
- Avoid heat treatments for at least 24 hours post-application.
- Keep the brow area dry and free of any products for 24 hours after application.
- Do not apply brow makeup for at least 24 hours post-treatment.
- Avoid sunbathing and sun exposure for 24 hours to lessen the chance of the Henna fading.
- Avoid swimming/saunas/sweating for at least 24 hours post-application.
- Do not exfoliate or rub the brow area post application as this will cause the Henna to fade quicker.
- Apply Brow Code Brow Growth Oil daily to keep brows nourished & healthy.